manualshive.com logo in svg

Konica Minolta bizhub C220 Series, User Manual

Share
Download
Konica Minolta bizhub C220 Series User Manual Download Page 143

bizhub C360/C280/C220 (Version 4)

6-13

6.6

Printing upon data reception

6

Restrictions for printing

The following lists the restrictions on printing documents.

-

Documents are printed in reduced size if the print paper size is smaller than that determined in Step 1.

-

If [Print Separate Fax Pages] is set to [OFF], documents are automatically rotated by 90 degrees if the 
orientation of the print paper does not match with that determined in Step 1.

-

To print multiple-page documents of mixed size, the functions and settings described in this section 
are determined for each page.

-

If the paper size determined in Step 1 and 2 is loaded in multiple paper trays, the paper tray is selected 
according to the setting specified in [Auto Tray Selection Settings].

-

If only the bypass tray is assigned for the thus determined paper size, feed paper from the bypass tray 
for printing. However, if the bypass tray is not included in the options of [Auto Tray Select] in [Auto Tray 
Selection Settings], the bypass tray cannot be used for feeding paper.

-

If [Print Separate Fax Pages] is set to [ON], and [TX/RX Settings] in the Utility menu configured as fol-
lows, documents are not divided.

–

A specific tray is assigned in [Tray Selection for RX Print].

–

[Min. Reduction for RX Print] is set to [Full Size].

–

[Print Paper Selection] is set to [Fixed Size] or [Priority Size].

–

[Duplex Print (RX)] is set to [ON].

-

If the selected-size paper is not loaded in the paper tray, a message appears prompting you to load the 
paper of the size.

–

If [Print Paper Selection] is set to [Priority Size], any one of the paper sizes 8-1/2 

e

 11, 8-1/2 

e

 14, or 

11

e

 17 (A4, B4, or A3) is selected as optimal paper size. If the selected-size paper is not loaded in the 

paper tray, the paper size is selected according to the normal procedure.

–

If Print Paper Selection is set to Fixed Size, any one of the paper sizes 8-1/2 

e

 11, 8-1/2 

e

 14 or 11

e

17 

(A4, B4, or A3) is selected as optimal paper size. If the selected-size paper is not loaded in the paper 
tray, a message appears prompting you to supply the paper of the size. The message remains dis-
played until the paper is loaded in the paper tray.

–

If [Tray Selection for RX Print] is set to other than [Auto], documents are printed on the paper loaded in 
the paper tray (except the bypass tray) specified in [Tray Selection for RX Print]. If the specified paper 
size is smaller than that of the received document, the document is printed in reduced size. If the paper 
tray runs out of paper, a message appears prompting you to supply the paper of the size. The message 
remains displayed until the paper is loaded in the paper tray.

–

If [Print Paper Selection] is set to other than [Auto Select] and [Tray Selection for RX Print] is set to other 
than [Auto], higher priority is given to the setting in [Tray Selection for RX Print].

d

Reference

For details on [Print Separate Fax Pages], refer to page 10-20.

For details on [Auto Tray Selection Settings], refer to the [User's Guide Copy Operations].

For details on [Tray Selection for RX Print], [Min. Reduction for RX Print], [Print Paper Selection] and [Duplex 
Print (RX)], refer to page 10-20.

Summary of Contents for bizhub C220 Series





























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands