Troubleshooting
113
7
Error message printout
7
The printer can also report problems by printing an error message. Use the table below to identify and clear
the error message. The default setting for the error message printout is off. If you want to turn the error
message printout on, from the
Advanced
tab of the Windows
®
printer driver click the
Other Print Options...
,
and then choose
Error Message Printout
.
Error message
Action
Memory Full
Press
Go
to print the remaining data in the printer memory. Cancel the print job
if you want to delete the remaining data in the printer memory. See
Control panel
buttons
on page 79.
Reduce the complexity of your document or cut the print resolution.
Add more memory. See
Installing extra memory
on page 86.
Print Overrun
Press
Go
to print the remaining data in the printer memory. Cancel the print job
if you want to delete the remaining data in the printer memory. See
Control panel
buttons
on page 79.
If this does not clear the error, reduce the complexity of your document or cut the
print resolution.
Add more memory. See
Installing extra memory
on page 86.
Set page protection to
Auto
by using the supplied Windows
®
driver or the control
panel.
Change the following settings in the supplied Windows
®
driver and try again. The
best combination of these settings will vary depending on your document:
Graphics
1
TrueType Mode
1
Use Printer TrueType
®
Fonts
1
1
Choose the
Basic
tab, choose
Manual
in
Print Settings
, and then click
Manual Settings...
.
Resolution Adapted
Reduce the complexity of your document before you print to prevent automatic
reduction in the resolution.
Downloaded From ManualsPrinter.com Manuals