Troubleshooting
112
7
No Paper
No Paper for Manual
Feed
No Paper MP or Size
Mismatch
No Paper in Tray 1 or
Size Mismatch
No Paper in Tray 2 or
Size Mismatch
No Paper in Tray 3 or
Size Mismatch
The paper tray may be out of paper or not properly installed. If it is empty, put a new stack
of paper in the paper tray and then press
Go
. If the problem is still unsolved, the paper
pick-up roller may be stained. Clean the paper pick-up roller. See
Cleaning the paper
pick-up roller
on page 106.
If there is paper in the paper tray, make sure it is straight. If the paper is curled, straighten
it before printing. Sometimes it is helpful to remove the paper, turn the stack over and
put it back in the paper tray.
Cut the amount of paper in the paper tray, and then try again.
Make sure you use paper that meets KONICA MINOLTA recommended paper
specifications. See
About paper
on page 6.
Load the same size paper that you selected in the current driver setting.
Print Overrun
Press
Go
to print the remaining data in the printer memory. Cancel the print job if you
want to delete the remaining data in the printer memory. See
Control panel buttons
on
page 79.
If this does not clear the error, reduce the complexity of your document or cut the print
resolution.
Add more memory. See
Installing extra memory
on page 86.
Change the following settings in the supplied Windows
®
driver and try again. The best
combination of these settings will vary depending on your document:
Graphics mode
TrueType mode
Use Printer TrueType
®
Fonts
1
1
Choose the
Basic
tab, choose
Manual
in
Print Settings
, and then click
Manual Settings...
.
Service call error
Check the LED indication to identify the error. See
Service call indications
on page 77.
Storage Full
The RAMDISK size is set to 0 MB. Increase the RAMDISK size. Or there is no space to store
jobs. Delete unnecessary macros or fonts.
Replace PF KitMP
Call your dealer or KONICA MINOLTA Customer Service for a replacement paper feeding
kit (paper pick up roller and separation plate) for the MP tray.
Replace PF Kit1
Call your dealer or KONICA MINOLTA Customer Service for a replacement paper feeding
kit (paper pick up roller and separation plate) for Tray 1.
Replace PF Kit2
Call your dealer or KONICA MINOLTA Customer Service for a replacement paper feeding
kit (paper pick up roller and separation plate) for Tray 2.
Replace PF Kit3
Call your dealer or KONICA MINOLTA Customer Service for a replacement paper feeding
kit (paper pick up roller and separation plate) for Tray 3.
Replace Fuser Unit
Call your dealer or KONICA MINOLTA Customer Service for a replacement fuser unit.
Replace Laser Unit
Call your dealer or KONICA MINOLTA Customer Service for a replacement laser unit.
Replace Toner
See
Replacing the toner cartridge
on page 90.
Toner Low
Buy a new toner cartridge and have it ready for when the
Replace Toner
status is
indicated.
Error message
Action
Downloaded From ManualsPrinter.com Manuals