Konica Minolta AeroDR SKR 4000, Operation Manual

Page: 41 / 60

41
1
2
3
4
5
6
7
8
9
10
11
12
3�6 Position to affix DR Detector identification label
When using more than 1 DR Detector and affixing
identification labels (stickers) to the outside of the DR
Detectors, it is recommended to affix the labels to the
2 places ((1), (2)) shown as follows.
IMPORTANT
• Affix the labels only in the recommended places. Failure to
do so may cause the labels to come off or image uneven-
ness to occur
Position to affix DR Detector identification label
XXXXXXXXXXXXXXXX
(1) (2)
HINT
• Use of commercially available vinyl (Tepra, etc.) labels are
recommended for the identification labels (stickers). When
possible, use labels that do not easily peel off.
• It is recommended to write the name and identification
number registered in the image processing controller on
the label.