Konica Minolta AeroDR SKR 4000, Operation Manual

Page: 12 / 60

12
1�3 Safety precautions
Read all safety precautions thoroughly before using
this device.
Be sure to observe the safety precautions described in
this section.
1�3�1 Precautions before usage
CAUTION
• The operators (hospitals and clinics) hold responsibility
for the usage and maintenance of this device. Do not
use this device unless you are a physician or certified
person under law.
• This device excluding the image processing controller is
suitable for use in the patient environment. (PC used for
the image processing controller is not suitable for use in
the patient environment.)
• Confirm that this device is operating normally before
using.
• When a problem occurs with this device, turn the power
off, attach an appropriate sign, such as "malfunction",
on this device, and contact Konica Minolta technical
representatives.
• This device is not explosion-proof, so do not use any
flammable or explosive gas near this device.
• For the basic operation of the computer, display moni-
tor, and optional parts for this device, refer to their op-
eration manuals
• Please follow the rules and regulations of your relevant
authorities in the disposal of this product, accessories,
options, consumables, media and their packing materi-
als
• A 15-minute warm-up operation is required before per-
forming exposure.
• Please use an inverter type X-ray device.
1�3�2 Precautions for usage
WARNING
• The DR Detector is a precision instrument. If it is
dropped or hit against any object, a failure may occur
due to strong impact or excessive load.
• Take note of the following when using this device:
— Do not subject the DR Detector to strong shocks or
excessive loads by dropping it, etc.
— Do not exceed the specified overall load range when
applying a load to an DR Detector.
— Do not disassemble or modify this device.
— Do not connect any devices that were not purchased
from Konica Minolta.
— Do not turn off the power switch or disconnect cables
such as the power cable while the System is running.
— Be careful not to drop the DR Detector on any part of
a person's body by catching the DC Power Cable on
your feet
• The DC Power Cable is connected to the DR Detector
using magnetic force. When moving the DR Detector,
do not hold onto the DC Power Cable, and always hold
on the DR Detector. Also, do not grasp and pull the DR
Detector forcefully