Konica Minolta 0676, Operation Manual

Page: 34 / 68

32
REGIUS MODEL 190 OPERATION MANUAL Ver.1.03 2004.12
CS-1/CS-3 software version
will be shown on the start up
screen when starting up the
system.
Sleep Mode Status
"operation" Lamp : ON (green)
LCD Panel
: OFF
Power OFF Status
"operation" Lamp : OFF
LCD Panel
: OFF
Sleep Mode
This means that the powering
on and off of the REGIUS
MODEL 190 is controlled
through a CS-1/CS-3.
When the REGIUS MODEL
190 is in this mode, it will start
up automatically when the CS-1
/CS-3 starts up.
4
Turn ON the standby button located on the
front of the main unit of the CS-1/CS-3.
• CS-1/CS-3 and OS (Operating System)
startup messages will be displayed
successively on the LCD.
• After short time, the system startup screen
will be displayed on the CS-1 operation unit.
This display indicates that internal system
initialization is being carried out.
• Upon completion of initialization, the initial
screen (Examination List screen or
Examination Search screen) will be
displayed on the CS-1 operation unit,
indicating that the system is ready for
operation.
• The REGIUS MODEL 190 will recover from
the sleep mode.
(During this process, the LCD on the
REGIUS MODEL 190 will show
"INITIALIZING..." followed, upon
completion of initialization, by
"READY", and the READY lamp will
illuminate.)
1
Before switching the power,ensure that
the REGIUS MODEL 190, CS-1or CS-3
and JM or JM-Box are correctly
connected and that the power button of
JM or JM-Box is turned ON.
2
Turn on the standby button on the CS-1 or
CS-3 operation unit.
• Power lamp will change from orange to
green.
3
Open the front door by slightly depressing
the lower right edge (When the console is
CS-1).
There are two types of display shown on the CS-1/CS-3 initial screen;
these are the examination search screen and the examination list
screen. Which of the two will be displayed can be selected in the
System Menu.
Examination Search Screen Examination List Screen
CS-3/CS-1 Start up Screen
Daily Start Up
(When connected to CS-1 or CS-3)
The REGIUS MODEL 190 starts automatically upon start up of the CS-1/CS-3.The following is a
description of the procedure for start up of the REGIUS MODEL 190 while it is on sleep mode. For
further details, refer to the CS-1/CS-3 Operation Manual.