Konica Minolta 0676, Operation Manual

Page: 46 / 68

44
REGIUS MODEL 190 OPERATION MANUAL Ver.1.03 2004.12
1
2
3
4
REGIUS MODEL 190
STATUS
No.
ERROR MESSAGE REMEDY
Operating
Initializing
Operating
Operating
Initializing
ERROR [XXXXX]
REMOVE REMAINING CST
ERROR [04906] BAD CST
REMOVE REMAINING CST
Error [04908]
ERROR [XXXXX]
PLS RESTART
Cassette jam has occurred. Resolve by following the procedure
detailed in "Handling Cassette Jams".
1. Open and close the front cover. Most of errors can be
restored with this simple method.
2. If the above procedures fail to restore the REGIUS MODEL 190:
Push the "operation" button to turn OFF and push it again to
restart the REGIUS MODEL 190.
3. If the above procedure (2) fails to restore the REGIUS
MODEL 190:
Turn OFF/ON the power breaker, then push the "operation"
button to restart the REGIUS MODEL 190.
4. In cases where the REGIUS MODEL 190 cannot be restored
by any of the procedure described above (3):
Contact your Technical Representative.
The REGIUS Plate in the cassette may not be firmly adhered to
the back panel. If this error occurs, part of the imag data may be
damaged. Resolve by following the procedure detailed in
"Handling Cassette Jams".
Only the front panel is ejected; the back panel is left in the main
unit. Resolve by following the procedure detailed in "Handling
Cassette Jams".
Troubleshooting for errors with error codes
Remedy "3." (Breaker ON/OFF) should be carried
out only in cases where neither "1." nor "2." are
effective in restoring the REGIUS MODEL 190.
p.48 Handling Cassette Jams
p.48 Handling Cassette Jams
p.48 Handling Cassette Jams
Two types of error messages will be displayed on the LCD; error messages with error codes or
without error codes. Error messages without error codes are "warning errors".
When the same error repeats even after remedial action, contact your Technical Representative.
Error Messages and Remedies