Konica Minolta 0676, Operation Manual

Page: 3 / 68

1
REGIUS MODEL 190 OPERATION MANUAL Ver.1.03 2004.12
We thank you for purchasing the "Direct Digitizer DD-941" (henceforth referred
to as REGIUS MODEL 190).
The REGIUS MODEL 190 is designed to read REGIUS Plates.
The basic operational procedures for the REGIUS MODEL 190 such as start
up/shut down, patient registration and parameter settings, are carried out using
a REGIUS CONSOLE CS-1/CS-2/CS-3 (henceforth referred to as CS-1/CS-
2/CS-3) available separately.
Before proceeding with usage of the REGIUS MODEL 190, time should be taken
to fully familiarize yourself with the contents of this operation manual as well as
the operation manual for the console (CS-1/CS-2/CS-3). Please note also that
since safety precautions regarding handling of and operational procedures for
the product are set out in this manual, the manual should at all times be kept in a
readily accessible place for easy reference.
Features
1 Realization of "Ultimate Resource Sharing Concept"
The reader and console may be separated, allowing maximum freedom of layout.
System architecture best suited to the number of examinations carried out or the room
space available may be realized.
2 Space-saving
The product is compact with a footprint of only 58 X 58 cm.
3 High-speed Processing
Throughput for 14" X 14" size is approximately 90 plates/hr.
4 Comfort Operability
Insertion and ejection slots are independent.
Next cassette can be set in the cassette insertion slot. (+1 stack)
Up to four processed cassettes can be stacked on the cassette stacker.
Foreword
REGIUS CONSOLE CS-1
REGIUS CONSOLE CS-3
This console (controller)
controls communication,
processing, and output of the
image data read by the
REGIUS MODEL 170, 190
and/or REGIUS MODEL 350,
550.
REGIUS CONSOLE CS-2
This console (controller)
controls communication,
processing, and output of the
image data read by the
REGIUS MODEL 190.