4 - OPERATING INSTRUCTIONS
Set-up instructions
To set-up the implement proceed as follows:
1.
Remove the wires that secure all the loose single
parts from both the pallet and the implement.
2.
Lift the implement at the headstock. Use a suitable
lifting device.
3.
Remove the pallet from the rear side of the imple-
ment.
4.
Position the left-hand side and the right-hand side
support legs.
5.
Lower the implement.
6.
Connect the implement to the three-point headstock
of the tractor.
7.
Connect the hydraulic hoses of the implement to the
tractor hydraulic system.
8.
Connect one end of the rope to the Hydrostop sys-
tem.
9.
Lift the implement slightly.
10. Act on the tractor hydraulic system to wing out slowly
the lateral rotor assembly.
11. Set all the support wheels in working position.
12. Install the safety panels on the left-hand side and on
the right-hand side.
13. Move the bolt
(1)
of the arms from the transport posi-
tion
(A)
to the working position
(B)
.
ZEIL18HT00735AA
3
ZEIL18HT00736AA
4
1. Install the rotor arms. See Page
4-3
.
4-2
Summary of Contents for Z 665 H
