6 - WORKING OPERATIONS
6 - WORKING OPERATIONS
###_6_###
General information
Implement overview
The tedder is an implement for the following operations:
• Tedding.
• Turning.
• Clearing of windrows or small nights swaths.
For the road transport, especially for narrow roads, the
implement is equipped with a hydraulic system that moves
the outer rotors to the vertical position.
The implement is composed of the following assemblies:
• A central rotor assembly.
• A left-hand side rotor assembly.
• A right-hand side rotor assembly.
Each rotor is composed of six arms equipped with double
spring tines which cleanly take up the crop and leave a
scatter pattern behind the implement.
A running wheel supports each rotor to compensate jerks
caused by the ground irregularities.
The left-hand side assembly and the right-hand side as-
sembly can move in height to follow the ground contours
on uneven ground.
This movement assures excellent results in all conditions.
A smooth run of the implement allows, with a high working
speed and a large working width, a considerable acreage.
6-1
Summary of Contents for Z 665 H
