![background image](http://html1.mh-extra.com/html/kongskilde/z-665-h/z-665-h_operators-manual_1992818010.webp)
1 - GENERAL INFORMATION
Electro-Magnetic Compatibility (EMC)
This machine complies strictly with the European Regulations on electro
‐
magnetic emissions. However, interference
may arise as a result of add
‐
on equipment which may not necessarily meet the required standards. As such interfer-
ence can result in serious malfunction of the unit and/or create unsafe situations, you must observe the following:
• Ensure that each piece of non
‐
KONGSKILDE equipment fitted to the machine bears the CE mark.
• The maximum power of emission equipment (radio, telephones, etc.) must not exceed the limits imposed by the
national authorities of the country where you use the machine.
• The electro
‐
magnetic field generated by the add
‐
on system should not exceed
24 V/m
at any time and at any lo-
cation in the proximity of electronic components.
Failure to comply with these rules will render the KONGSKILDE warranty null and void.
1-6
Summary of Contents for Z 665 H
