20
MS MT KK EN 180103
Conventional Ploughs MS/MT
3. BASIC SETTINGS
3. Land wheel
The angle of the land wheel must be adjusted so that it runs parallel with the landside
of the last plough body. This is adjusted by altering the position of the wheel bracket, by
placing rear bolt
F
in one of the three different positions, see section 3 ADJUSTMENT OF
WORKING WIDTH, ALTERNATING THE BEAM HOUSING POSITION.
SELECT THE CORRECT FURROW WIDTH. The working width should be in relation to the
ploughing depth, i.e. max depth = 2/3 of the working width. This gives a sufficient weight to the
furrow slices and ploughing will have a good finish, see section 5 USEFUL OPERATIONAL
POINTS, SELECT THE CORRECT FURROW WIDTH.
F
