7
1. INTRODUCTION
Do the maintenance regularly
Do the maintenance work regularly as it is described in this manual, section 6 MAINTENANCE.
Replace wearing parts as described. There is a risk of poor performance if the machine not
is maintained properly.
Retighten all nuts and bolts
Always remember to retighten all nuts and bolts after about 3 hours of use. Make sure that
bolts and nuts are tight at all times. Tightening torques are shown in section 6 MAINTENANCE.
Use protection gloves
Always use gloves when working with parts on the machine as they can have sharp edges.
TRANSPORT SAFETY
Beware of the length of the plough
The plough is long and does not completely follow the tractor in sharp turns. Avoid that the
plough’s rear end hits an obstacle. The tractors braking pedals must be locked together
during transport driving.
The stabilizers of the lower links
The stabilizers of the lower links should be locked when the plough is in transport position,
so that the plough is fixed sideways.
Comply with the relevant traffic regulations
The operators have to observe relevant statutory or other national regulations dealing with
road safety and labor safety issues.
Drive safe, max 25km/h
Be a safe and courteous driver, yield to oncoming traffic. In all situations, do not exceed 25
km/h.
