Kongskilde CM 305 F, Operator'S Manual

Page: 17 / 58

1. INTRODUCTION
PIGB 097A 05 CM 305F 0218
17
SAFETY DECALS
The safety decals shown on the previous page are positioned as shown on the
drawings at the bottom of the page. Before using the machine, check that all decals
are present: if not, require those missing. The decals have the following meaning:
1 Read the instruction manual and the safety instructions.
This is to remind you to read the delivered documents to ensure the machine is operated
correctly and to avoid unnecessary accidents and machine damage.
2 Stop the tractor engine and remove the ignition key before touching the machine.
Always remember to stop the tractor engine before lubricating, adjusting, maintaining or
repairing. Also remember to remove the ignition key to ensure that nobody starts the
engine.
3
Risk of injury during the connection.
Never let anybody stand between the tractor and the machine during connection to the
tractor. An unintentional manoeuvre may cause serious injury.
4
Operation without canvas.
Do not start the machine unless canvases and guards are intact and in their right place.
The machine can throw out stones and other foreign matter during operation. The purpose
of the canvases and the guards is to reduce such danger.
5
Rotating blades.
Do not under any circumstances let anyone get near or stand near the machine during
operation. The rotating blades of the machine can without difficulty cause serious injury to
any part of the body if hit by such a blade.
6
Risk of stones being thrown.
Even though all canvases and guards are in the right place, there is still a risk of stones etc.
being thrown out. Therefore, nobody should be allowed to stand near the machine during
operation.
7
Children.
Never let children stand near the machine during operation. Especially not small children as
they have a tendency to do unforeseen things.
8
Rotating parts.
After the PTO drive shaft has stopped, the blades will have a momentum where they keep
rotating for up to 2 minutes. Wait until the blades have come to a complete stop before you
remove the canvas and the guards for inspection and maintenance.
9
The number and the direction of rotations.
Check that the PTO drive shaft runs with the right RPM and in the right direction. A wrong
number of rotations and/or direction of rotation can damage the machine with the risk of
personal injury as a result.
10
Risk of cutting.
There is a risk of getting fingers or hands crushed or cut off if touching parts of the machine
when it moves up and down. Make sure that other persons keep a safe distance from the
moving parts.
11
The PTO drive shaft.
This decal has the purpose to remind you how dangerous the PTO drive shaft can be if it is
not correctly mounted or protected.