Kongsberg cNODE Micro, Instruction Manual

Page: 21 / 56

426351/A
19
Powering up the transponder
The transponder is designed for operation in water only. However, the transponder may
be operated in air for test purposes over a short period of time.
Procedure
1 Connect the on/off plug to the end cap connector.
2 Tighten the locking sleeve to the end cap connector.
Result
A buzz can be heard within 25 seconds as a confirmation that the transponder is activated.
Further requirements
It is recommended to test the transponder with the Test and Configuration Test (TTC)
unit to make sure the transponder is working properly before operation.
Getting started