Konami GQ830-HD, Operator'S Manual

Page: 33 / 76

31
Total number of
coins for last
7 days Total number of
coins for past 52
week
Indication of
play conditions
Total number of
coins by hours and
days of the week
PULL GUN TRIGGER = SELECT OPTION
PRESS START BUTTON = EXECUTE
BOOKKEEPING
CLOCK SETUP
G.M.T
SET TO HOUR : 16
07
MINUTE : 27 27
SECOND : 42 42
SAVE AND EXIT
EXIT
Displays the Greenwich Mean Time.
Sets the current hour.
Sets the current minute.
Sets the current second.
5 Game settings
BOOKKEEPING
Mode for displaying the total data on the number of coins put in the machine.
If the time is preset on the “CLOCK SETUP” screen, the total data on the number of
coins put into the machine can be checked for each coin slot.
Pull the rifle unit’s trigger to select “HOUR”, “MINUTE”, and “SECOND”. Press the
start button to adjust the current time.
Make sure the current time is correct, select “SAVE AND EXIT” and press the start
button. (The current time is now set and the main menu screen shows up.)
Displaying the bookkeeping information of coins
•If the time setting has not been made — for example, after the machine has been
set up or initialized —, the “CLOCK SETUP” screen shows up.
•When the time setting has been modified, the bookkeeping information is
automatically cleared. With the current time not set, the total of received coins
and other bookkeeping data are not displayed. (The data once erased can not
be resumed.)
MEMO
When the time has been preset on the “CLOCK SETUP” screen as shown above,
the following “BOOKKEEPING” information is displayed on the screen. Select
“NEXT DATA SUMMARY” and press the start button, and the screen will switch in
the following sequence. To return to the main menu screen, select “EXIT” and
press the start button.
Also, when the current time has been set and “INCOME DATA CLEAR” has been
selected and the start button pressed, the current time and BOOKKEEPING data
can be cleared.
At this time, the question “DO YOU WANT TO CLEAR DATA? YES/NO” is indicated
on the screen. Pull the rifle unit’s trigger to select “YES” or “NO”. If “YES” is
selected, “NOW CLEARING” appears on the screen and the “BOOKKEEPING” data
will be deleted. The data will be saved in the factory settings and the main menu
screen will show itself up.
If “NO” is selected, “NO MODIFIED” is indicated and the main menu appears again
without deletion of the data.
•This screen is just an example.