Konami GQ830-HD, Operator'S Manual

Page: 40 / 76

38
6-6 Separating the machine
How to separate the machine
The machine can be divided into the units.
•Before separating the units from the machine, be sure to turn OFF the
main power switch and remove the power cord plug from the receptacle.
•Before moving the machine, be sure to turn OFF the main power switch,
unplug the power cord from the receptacle and remove the power cord
from the machine.
•Before moving the machine, be sure to fully lift the six adjusters and move
it on the casters.
•When moving the monitor unit, be sure to push it along sideways (to the
right or left). When moving it on a slope or getting it over a level difference,
be sure to take the buddy system.
•When connecting the separated units, take care not to catch the wiring
and your hand between the units.
1
Be sure to turn OFF the main power
switch and unplug the power cord
from the receptacle.
2
Raise the six adjusters to let the
casters come in contact with the
floor.
How to separate the monitor unit and control unit
3
Unscrew the fixtures off both sides.
Draw the units 100 mm (3.94 in) or
shorter apart from each other.
•Be careful not force the units too far
from each other. The wires connected
between the units may be damaged
inside.
•Fix each of the unit on the monitor unit
and fix it by tighting the screws
MEMO
100 mm
(3.94 in) or shorter
Monitor unit
Fixture
Screws
Control unit
6 Installation and assembling
Raise the adjusters and bring down the casters
on the floor.
Hexagon nut