Konami GQ830-HD, Operator'S Manual

Page: 28 / 76

26
GUN CHECK
Mode for adjusting and checking the rifle unit’s swing range.
Look at the screen for the marker that the gun barrel is pointing to. If the marker is
extremely out of position, press the test button on the service panel to call the gun
adjustment mode.
To return to the main menu screen or interrupt the gun adjustment mode, press the
start button.
Checking the performance of the rifle unit
SCREEN CHECK
Mode for checking the monitor screen display.
Adjust the focus, distortion and size of the image on the screen while watching the
crosshatch pattern. Use the monitor adjustment PCB (See page 56) to make
adjustments.
To return to the main menu screen, press the start button.
Adjusting the monitor screen distortion
PRESS TEST SWITCH = GUN ADJUST
PULL GUN TRIGGER = SHOOT
PRESS START BUTTON = EXIT
GUN CHECK
Marker
Make sure the marker is where the gun barrel is
pointing to.
Bullet mark
Pull the rifle unit’s trigger and make sure the bullet mark
is left.
Gun adjustment mode
This mode is intended to adjust the pinpointing of the rifle unit. Take the following
adjustment procedure.
1 Point the gun barrel to the lower-left corner of the screen, and pull the rifle unit’s
trigger.
2 Point the gun barrel to the upper-right corner of the screen, and pull the rifle unit’s
trigger.
3 The “NOW SAVING” message appears and the settings will be saved. Then the
“GUN CHECK” screen shows up again. Move the rifle unit and make sure the
marker is in position.
•This screen is just an example.
5 Game settings
Gun check mode
•If an error happens in “GUN VOLUME DATA” at the start of the machine, the “Gun
adjustment mode” screen shows up itself.
•No image appears on the scope while in the “Gun check mode” and “Gun
adjustment mode”.
MEMO