Konami GQ830-HD, Operator'S Manual

Page: 57 / 76

55
•Before resetting the circuit protector, be sure to turn OFF the main power
switch and unplug the power cord from the receptacle.
•If the circuit protector trips soon again, immediately turn OFF the main
power switch, unplug the power cord, and contact your nearest dealer.
•There are high-voltaged parts inside the product. Other persons than
qualified industry specialist should not open the back door and side door.
When the back door and side door is opened, pay due attention not to
touch the inside unnecessarily.
•When opening the back door and side door, be sure to turn OFF the main
power switch and unplug the power cord from the receptacle.
•If the machine is in abnormal conditions and does not operate normally,
immediately turn OFF the main power switch, unplug the power cord from
the receptacle and contact your nearest dealer.
7-9 Resetting the circuit protector
If an overcurrent or short circuit occurs, the circuit protector will be automatically
actuated to protect the electric circuits of the game machine. When resetting the
circuit protector, turn OFF the main power switch, unplug the power cord from the
receptacle, eliminate the cause, and then press the button of the circuit protector.
How to reset the circuit protector
7 Maintenance
1
Be sure to turn OFF the main power
swith and unplug the power cord
from the receptacle.
2
Remove the cause of the trouble.
Press the button on the circuit
protector of the power unit.
Power unit
Circuit protector (8A)
Main power switch
Power inlet