Konami EVILNIGHT Operator'S Manual Download

Page: 2 / 53

Thank you for purchasing this KONAMI product. This manual explains how to operate your
game machine correctly and safely.

About this product

•Failure to operate the machine correctly could result in malfunction or

accidents, so please read this manual carefully before commencing
operation. Be sure to operate the machine as described in this manual.

•Keep this manual carefully so as to be ready for use when necessary.
•If the machine still fails to display or to get started, immediately turn OFF

the main power switch and contact your nearest dealer.

•The specifications of this product are subject to change without notice for

reasons such as improving the performance.

•The contents of this game, its main data and design are protected by copyright

law and industrial property law.

•Unauthorized reproduction of this document or any of its contents is strictly

forbidden.

•This manual covers the following models:

•GQ810-TB •GQ810-UC

•GQ810-SD

The specifications of GQ810-TB may be somewhat different from GQ810-SD and GQ810-UC.

In such a case, read the descriptions of the model which applies to the game machine you

are operating.

The copyright of the operating system used for this game software is owned by MATSUSHITA ELECTRIC

INDUSTRIAL CO., LTD.

Summary of Contents for EVILNIGHT






















































Search results

Summary of Contents for EVILNIGHT

Reviews:

Related manuals for EVILNIGHT

Brands by name

Popular brands

Konami EVILNIGHT, Operator'S Manual

Search results

Summary of Contents for EVILNIGHT

Reviews:

Related manuals for EVILNIGHT

Brands by name

Popular brands