Komatsu WA600-8, Operation & Maintenance Manual, Page: 154 / 554

(2) DOWN switch
Moves to the next item (1 line below).
When on the last line, it moves to the first line.
(3) RETURN switch
Cancels the selected change, and returns the screen to “Rearview Monitor Setting” menu screen.
(4) ENTER switch
Allocates the selected change, and returns the screen to “Rearview Monitor Setting” menu screen.
The setting of “Guide Line Display Mode” is maintained even after turning the starting switch to OFF position.
The default is “ON”.
REMARK
For the rearview monitor and the guide line, see “HANDLE REARVIEW MONITOR (3-142)” and “METHOD FOR
ADJUSTING REAR VIEW CAMERA ANGLE (3-189)”.
REVERSE-INTERLOCK SELECTION MODE
Display method of rearview monitor can be changed.
1.
Select “Reverse-interlock Selection mode” on “Rearview
Monitor Setting” menu screen, then press ENTER switch
(4).
2.
“Reverse-interlock Selection mode” screen is displayed.
Select “ON” or “OFF” on “Reverse-interlock Selection
mode” screen, then press ENTER switch (4).
“OFF”
Always displays images on the rearview monitor.
“ON”
Displays images on the rearview monitor only when travel-
ing in reverse.
You can perform the following operations with switches (1)
to (4) on the switch panel.
(1) UP switch
Moves to the previous item (1 line above).
When on the first line, it moves to the last line.
EXPLANATION OF COMPONENTS OPERATION
3-86