Komatsu WA100M-7, Operation And Maintenance Manual

Page: 9 / 304

Foreword 1.3 Introduction
WA80M-7, WA100M-7 – VENAM03001
1-7
1.3 Introduction
This loader is an independently powered machine moving on
wheels. Using the equipment (e.g., a bucket or fork) installed to
its front, the loader can be used to load or dig material while mov-
ing forwards.
This Komatsu machine is designed to be used mainly for the fol-
lowing work:
 Digging
 Smoothing
 Pushing
 Loading
1.3.1 Intended use
If you use the machine for any other purpose than those specified
above, we will not accept any responsibility for its safety. Any con-
siderations regarding safety will then be up to the owner or the
operating and maintenance personnel. In any case, neither you
nor any other person are/is authorised to perform work and func-
tions explicitly prohibited in these operating instructions.
The transport of persons in the work equipment is strictly forbid-
den!
For details of the operating procedure, see chapter “Working with
the wheel loader (3-78)”.