Komatsu WA100M-7, Operation And Maintenance Manual

Page: 175 / 304

Operation 3.4 Transport
WA80M-7, WA100M-7 – VENAM03001
3-105
Rim with lifting fixture (option WA100M-7)
NOTICE
 Rim with lifting fixture may only be used with “Dunlop 455/70
R20 SPT9” tyres.

Only Komatsu replacement parts may be used. Original parts
may not be modified.
Attachment points and rims must be examined by an expert, reg-
ularly (at least yearly) and in case of an accident or unusual event,
for:
 Bolt (A) and nut are tight
Use thread locker
Torque = 400 Nm
 Deformation, wear, damage and excessive corrosion
 The lifting eyes must turn easily and be oriented as shown in
the illustration.
The lifting point of the traverse must lie over the center of gravity
(G).
The slings (ropes, chains or similar) may only be used at a max-
imum angle of 10° (see illustration above) and must not touch any
part of the machine aside from the attachment points.
The attachment points must not be rotated when carrying a load.
Lift the machine at these 4 points exclusively. There is a high risk
of the machine losing its balance.
G0070241A
350
1200 1200
2400
max.10 max.10
G
G0070241B
A