OPERATIONS AND CHECKS BEFORE STARTING ENGINE
OPERATION
176
PW160-7H VEAM390100
●
Hydraulic adjust boom operation: Depress front of pedal
(29) to extend the boom and the rear of the pedal to retract
the boom.
OPERATION OF DOZER + OUTRIGGERS
REMARK
Ensure safety lock lever is lowered (UNLOCKED).
1.
Press switch (4) on right control lever to change from boom
operation to dozer/outrigger operation (attachment).The mon-
itor will now display symbol (12) indicating the dozer/outrigger
option has been selected
2.
Using monitor panel switches (16~19) select the desired
combination of dozer/outriggers required. A light will illumi-
nate next to the switch to confirm selection
3.
Right control lever (7) will now operate the dozer/outriggers
4.
To return right control lever to boom operation activate switch
(4). Symbol (12) will now disappear from the monitor panel
display
WARNING
When moving the machine, confirm that the chassis attach-
ment is raised.
PRECAUTIONS FOR USING THE DOZER
1.
When using the dozer blade as stabiliser.
Use the dozer blade in the same way as an outrigger. How-
ever, use it only on level ground so that uneven loads will not
be applied to the blade.
Hydraulic adjust boom pedal
Raise
Lower
29
16
17
18
19
16
Rear Left Outrigger / Blade
17
Front Left Outrigger / Blade
18
Front Right Outrigger
19
Rear Right Outrigger
4
12
Right control lever
7
1
Lever forward
Attachment down
2
Lever back
Attachment up
Summary of Contents for PW160-7H
