Komatsu PW160-7H, Operation & Maintenance Manual

Page: 146 / 346

OPERATION OPERATION
146 PW160-7H VEAM390100
2. Remove dirt from around engine, radiator, battery
Check that there is no dirt accumulated around the engine, bat-
tery or radiator. If any dirt is found, remove it. Also check for flam-
mable material (rags, leaves, twigs, grass etc.) and remove.
3. Check for leakage of water or oil around engine
Check that there is no leakage of oil from the engine or leakage of
water from the cooling system. If any abnormality is found, repair
it.
4. Check for oil leakage from hydraulic equipment, hydraulic
tank, hoses, joints
Check that there is no oil leakage. If any abnormality is found,
repair the place where the oil is leaking.
5. Check for damage to wheels and tyres
6. Check for damage to handrail and for loose bolts
Repair any damaged handrails and tighten any loose bolts.
7. Check for damage to gauges, monitor, loose bolts
Check that there is no damage to the gauges and monitor in the
operator’s cab. If any abnormality is found, replace the parts.
Clean off any dirt on the surface.
8. Clean rear view mirror, check for damage
Check that there is no damage to the rear view mirror. If it is dam-
aged, replace it with a new mirror. Clean the surface of the mirror
and adjust the angle so that the view to the rear can be seen from
the operator’s seat.
9. Check lifting eye for damage
Check the lifting eye (or hook and safety latch) for damage. If
damage is found, contact your Komatsu distributor for repair.
10. Check seat belt and mounting clamps.
Check there is no abnormality in the seat belt or mounting
clamps. If there is any damage, replace with new parts