Komatsu HB365LC-3, Operation & Maintenance Manual

Page: 477 / 506

Do not let the machine come further off the ground than this
amount.
When the chisel does not penetrate or break the surface by
continuous impact to the same impact surface for 1 minute,
change the point of impact and perform breaking operations by
scraping from the edge.
The direction of penetration of the chisel and the direction of
the breaker body will gradually move out of line with each oth-
er, always adjust the bucket cylinder to keep them aligned.
Always keep the chisel pressed against the impact surface
properly not to strike at the air.
Prohibited operations
To increase the life of machine, and to ensure that operations are performed in safety, do not operate the ma-
chine in any of the following ways.
Do not operate all cylinders to the end of their strokes. Always leave approximately 5 cm to spare.
ATTACHMENTS AND OPTIONS RECOMMENDED ATTACHMENT OPERATIONS
6-35