Komatsu Utility 15001, Operation & Maintenance Manual

Page: 80 / 234

DETAILED CONTROLS AND GAUGES
78
3.2.5 SLIDING DOOR (Machines equipped with cab)
CAUTION
• Be sure to check that the sliding door is locked in position both when it is open and when it is closed.
Always stop the machine on level ground when opening or closing the door.
If the door is opened or closed on a slope, there is danger that the operating effort will suddenly change.
Do not open or close the door on slopes.
When opening or closing the door, always use door handle (1) and knob (2).
Be careful not to get your hands caught between the front pillar or center pillar.
If there is anyone inside the cab, call out to that person before opening or closing the door.
IMPORTANT
• Always clean the step at the entrance to the cab and take action to prevent snow or mud from accumu-
lating.
If snow accumulates, it may freeze and make it impossible to open the door.
Door Lock
When closing the door, pull the handle back to remove lock
(3), then pull the door to the front.
3.2.6 SLIDING WINDOW (Machines equipped with cab)
CAUTION
• Do not put your head or hands out of the window when traveling or during operations.
The window on the right side of the cab can be opened.