TECHNICAL HANDBOOK
INDUSTRIAL ROLLER SHUTTER_(RSM)
KOLLIAS Ltd.
Page 9/46
D.Z. –Ver.1
st
– 08/12/17
Address:
3rd km. National Highway Katerini - Thessaloniki
Katerini
Postal address:
P.O. Box : 91
60100, Katerini
Tel.:
+30 23510 36036
Fax:
+30 23510 45630
Web: www.kolliasdoors.com
Figure 4
All industrial roller shutters are equipped with an electronic control board, through which the
operation of motion is carried out. The ascent and descent of the curtain is achieved either by the
prolonged pressing of the control button, located on the control board, or by other means, such as the
use of remote control, cameras, motion detection radar, photocells etc.
The electronic control board has an installed emergency button, which allows the interruption of
motion in case of an emergency (Emergency stop), while for the same reason it is compatible with all
types of commercial motion detectors. In addition, it can be connected to a pair of industrial photocells
(optional equipment), which are mounted in the vertical guides, while it also has a built-in remote
control system with rolling codes and a stabilized frequency of information transfer, special for industrial
conditions.
The electronic control board has a digital communication port, with our construction machines, e.g.
recording systems or INTERLOCK control systems, which serve to control the operation of more than one
device, communicating with each other, giving priority to each other according to the program. Finally, on
the electronic board there are LED indicators, which give information about the various positions and
activities of the roller shutter. Furthermore, it should also be noted that there are models for products
that carry special digital panels to ensure:
απεριόριστες δυνατότητες προγραμματισμού
processing of network voltage measurement
visual indications existence, concerning the operation of the structure
