TECHNICAL HANDBOOK
INDUSTRIAL ROLLER SHUTTER_(RSM)
KOLLIAS Ltd.
Page 33/46
D.Z. –Ver.1
st
– 08/12/17
Address:
3rd km. National Highway Katerini - Thessaloniki
Katerini
Postal address:
P.O. Box : 91
60100, Katerini
Tel.:
+30 23510 36036
Fax:
+30 23510 45630
Web: www.kolliasdoors.com
Then place the screws that secure the base to the mounting, and before it is tightened we
visually check that the gap between the shaft and the base (motor - safety brake) is uniform (T1 = T2)
(Figure 6). This gap is designed to be changeable, especially on the side of the motor’s base, for reasons
of expediency. Particular emphasis must be placed on the correct mounting support so that the gear
chain is stretched, thereby ensuring smooth operation on the roller shutter.
STEP 6: Adjust the roller shutter’s curtain to the guides
Having fixed the bases on the mountings, we rotate the roller shutter using the crank, so that the
bottom bar can is settled on the guide's side. Then we open the screen cover and direct the bottom bar
downwards, with simultaneous manual rotation of the roller shutter, within the guides. It is
recommended that the device be supplied with electricity, when a portion of which at about 50 cm, is
inside the guides (Figure 7).
Figure 7