To select the automatic alternation mode in a 12-camera system,
1.
Select a desired split-screen mode from the recording display mode. For
example, 6-screen mode.
2.
Select the camera
sequence of the 12 cameras. For example, the first set with cameras 1, 2, 3, 4, 5 and
6, second set with 1, 3, 5, 7, 9 and 11, third set with 2, 4, 6, 8, 10 and 12.
3.
Select camera 1 by clicking on the icon. The icon appears pressed to indicate
the selection.
4.
Select cameras 2, 3, 4, 5 and 6, respectively. Each time a camera is selected,
the camera number appears with an arrow under the camera icon.
5.
Click
Add
button.
6.
Set the second switch sequence mode for 1
3
5
7
9 by clicking camera
numbers 1, 3, 5, 7 and 9 respectively.
7.
Click
Add
button.
8.
Following the same steps above, select the third set of cameras for 2, 4, 6, 8,
10 and 12 and add to the recording screen display schedule.
9.
Turn the checkmark on the
Select Automatic Alternation Mode Time
selection.
10.
Select 3 seconds of alternation time by using the slide selection bar.
Summary of Contents for KOL-4000
Page 2: ... ...
Page 23: ... through Kollector LAN Master ...
Page 39: ... connect the selected camera to controller ...
Page 50: ... 4 Click Input button ...
