Kollector KOL-4000, Operation Manual

Page: 38 / 82

Installing Controller
To install a new controller, insert the installation disk from the manufacturer into
the disk drive. Then, click
Install Controller
button and follow the instruction on
the screen. For detailed information on the controller, consult your dealer.
Using the Camera Controller (Pan/Tilt)
To activate the installed controller, turn on the checkmark on
Use
Controller
.
Connecting to Camera Controller
Checking
Use Controller
does not automatically allow the control of Camera's
pan/tilt or zoom lens functions. To use the pan/tilt, zoom, lighting and other
supplementary relay functions of the controller, first check on
Connect to
Controller .
Types of Controller
Click on down-arrow button to view camera controller menu and select
appropriate camera controller to use.
Selecting Cameras for the Controller
Chose the camera to be connected to the controller. The selected cameras will
appear dimmed. Click it again to deselect the camera.
Controller ID
Click on keyboard icon ( ) and input the controller ID. Refer to
Controller
Device
for proper Controller ID.
To operate camera’s pan/tilt function,
1.
Select the type of installed controller from the menu.
2.
Select the
desired camera attached to pan/tilt driver to control.
3.
Check
Connect to Controller
to