Kollector KOL-4000, Operation Manual

Page: 27 / 82

* Note
Set the image quality value at greater than 90 when recording wide-view
images.
The camera noise may not be effectively eliminated if the the movement
sensitivity value is set at over 70, and when there's no movement, the images
might be intermittently recorded.
Continuous Mode
Stores all images regardless of changes in images captured on cameras.
Regardless of the sensitivity of movement selected, Kollector records all images
captured on all cameras without skipping. This mode takes up more storage
space on HDD than when using normal mode.
For maximum storage efficiency, please use normal mode for normal daily
recording operations.
Recording Time 1
Selects the recording time of images from the selected camera.
Example: When selected from 0 to 24 hour, the recording resumes continuously
for 24 hours. When selected from 0 to 12 hour, images are recorded for the first
12 hours and stops recording for the next 12 hours.
*Note
Whenever the installed sensor detects any motion under Sensor Enable mode,
recording resumes even during the off-recording time. Refer to the section on
Sensor for detailed instructions.
Recording Time 2
To select another recording time other than the recording time selected in
Recording Time 1
, turn on the checkmark on the
Recording Time 2
and select
the second time frame.