button
button
button
This function only applicable for some models.
●
This function only applicable for some models.
●
●
●
1
9
Clock time adopts 24-hour mode.
The interval between two operation can't exceeds 5s.
Otherwise, remote controller will quit setting status.
Operation for T-ON/T-OFF is the same.
Press " WiFi " button to turn on WiFi function,
"WiFi " icon will be displayed on the remote con-
troller;
Hold " WiFi " button for 5s to turn off WiFi function
and " WiFi " icon will disappear.
Under off status, press "MODE" and " WiFi "
buttons simultaneously for 1s, WiFi module will
restore factory settings.
●
●
●
Under COOL or HEAT mode, press this button to
start up sleep function.
" " icon is displayed on remote controller. Press
this button again to cancel sleep function and " "
icon will disappear.After powered on, Sleep Off is
defaulted. After the unit is turned off, the Sleep
function is canceled.
In this mode, set temperature will be adjusted with
the change of time. Under Fan, DRY and Auto
modes, this function is not available.
button
●
I FEEL
Under on and off status, you can set T-OFF or T-ON
simultaneously.
Before setting T-ON or T-OFF, please adjust the
clock time.
After starting up T-ON or T-OFF, set the constant
circulating valid. After that, air conditioner will be
turned on or turned off according to setting time.
ON/OFF button has no effect on setting. If you don't
need this function, please use remote controller to
cancel it.
button
button
Press this button to start I FEEL function and " "
will be displayed on the remote controller. After
this function is set, the remote controller will send
the detected ambient temperature to the controller
and the unit will automatically adjust the indoor
temperature according to the detected tempera-
ture. Press this button again to close I FEEL func-
tion and " " will disappear.
SLEEP
WiFi
CLOCK
LIGHT
NOTE
NOTE
NOTE
NOTE
"T-OFF" word "OFF" will stop blinking. " " icon
resumes displaying. Cancel T-OFF
：
Under the
condi t ion tha t T-OFF is st arted up, pres s
"T-OFF" button to cancel it.
Press this button to turn on or turn off the health
and scavenging functions in operation status.
Press this button for the first time to start scaveng-
ing function; LCD displays " ". Press the button
for the second time to start health and scavenging
functions simultaneously; LCD displays " " and
" ". Press this button for the third time to quit
health and scavenging functions simultaneously.
Press the button for the fourth time to start health
function; LCD display " ". Press this button
again to repeat the operation above.
Press this button to turn on or turn off the display
light on the indoor unit.
The display light is defaulted on after energization.
signal sent by the remote controller.
the
area
where
indoor
unit can receive the
on,
the remote controller should
be
put within
temperature. When
I FEEL function is turned
avoid
detecting
inaccurate
ambient
temperature
or low temperature
in
order
to
remote controller
near
the
object of
high
when this function is set.
Do not put
the
Please
put the
remote controller near the user
button
to confirm the time. "
" icon stops
blink
ing.
reaching your
required time. Press
"CLOCK"
will change quickly..
Release this
button
when
“
▼
” buttons, the set temperature on remote controller
decrease 1 min. After 2s of long pressing of “
▲
” or
▲"
or "
▼
" button, clock time
will increase or
button within 5s to set clock time. Each pressing of
"
remote controller
will
blink. Press
"
▲
" or "
▼
"
Press this
button
to set clock time. "
" icon on