button
button
button
button
●
Press this button can select left & right swing
angle. Fan blow angle can be selected circularly
as below:
●
●
●
●
●
1
8
Press this button continuously more than 2s, the main
unit will swing back and forth from left to right, and
then loosen the button, the unit will stop swinging and
present position of guide louver will be kept immedi-
ately.
Under swing left and right mode, when the status is
switched from off to , if press this button again
2s later, status will switch to off status directly; if
press this button again within 2s, the change of swing
status will also depend on the circulation sequence
stated above.
This function only applicable for some models.
●
"
、
、
" may not be available. When air
conditioner receives this signal, the air conditioner will
blow fan automatically.
Press this button continuously more than 2s, the main
unit will swing back and forth from up to down, and
then loosen the button, the unit will stop swinging and
present position of guide louver will be kept immedi-
ately.
Under swing up and down mode, when the status is
switched from off to , if press this button again 2s
later, status will switch to off status directly; if
press this button again within 2s, the change of swing
status will also depend on the circulation sequence
stated above.
●
●
●
●
●
no display
position)
(stops at current
button
When selecting " ", air conditioner is blowing
fan automatically. Horizontal louver will automat-
ically swing up & down at maximum angle.
When selecting "
、
、
、
、
",
air condi-
tioner is blowing fan at fixed position. Horizontal
louver will stop at the fixed position.
When selecting "
、
、
", air conditioner is
blowing fan at fixed angle.
Hold " " button above 2s to set your required
swing angle. When reaching your required
angle, release the button.
no display
(horizontal louvers stops
at current position)
TURBO
T-ON T-OFF
NOTE
NOTE
T-ON button
"T-ON" button can set the time for timer on. After
pressing this button, " " icon disappears and
the word "ON" on remote controller blinks. Press
"▲" or "▼" button to adjust T-ON setting. After
each pressing "▲" or "▼" button, T-ON setting
will increase or decrease 1min. Hold "▲" or "▼"
button, 2s later, the time will change quickly until
reaching your required time. Press "T-ON" to
confirm it. The word "ON" will stop blinking." "
icon resumes displaying. Cancel T-ON: Under
the condition that T-ON is started up, press
"T-ON" button to cancel it.
T-OFF button
"T-OFF" button can set the time for timer off.
After pressing this button," " icon disappears
and the word "OFF" on remote controller blinks.
Press "▲" or "▼" button to adjust T-OFF setting.
After each pressing "▲" or "▼" button, T-OFF
setting will increase or decrease 1min. Hold "▲"
or "▼" button, 2s later, the time will change
quickly until reaching your required time. Press
preset temperature soon as possible.
that
the
ambient temperature approaches the
super-high fan speed to cool or heat quickly so
When function is activated,
the
unit
will
run at
will disappear.
button
again to
exit
turbo function
and
" "
icon
icon
is
displayed
on
remote controller. Press this
turn
to
quick
COOL
or
quick
HEAT
mode. "
"
Under COOL or HEAT
mode,
press this button to
T-ON, T-OFF buttons)
or "▼" button to
adjust
time.
(Refer to CLOCK,
When setting T-ON, T-OFF or CLOCK,
press
"▲"
(Temperature
can't be adjusted under auto mode)
the indoor unit will change accordingly.
finishing the settings, Temperature indicator on
on remote controller will change quickly. After
hold pressing "▲" or
"▼" buttons, set temperature
decrease set temperature 1°C (°F). After 2s of
Press
"▲"
or "▼" button to
increase or
circularly
as below:
angle.the
blow
angle of the fan can be selected
Press this button to select
up
&
down swing