8.
Select a location where the condensation water
2.
3.Select a location which is convenient to conne-
ct the outdoor unit and near the power socket.
4.
5.
Selection of installation location
Requirements for electric connection
3.
Air switch capacity
Basic requirement
Installing the unit in the following places may cau-
se malfunction. If it is unavoidable, please consu-
lt the local dealer:
Indoor unit
2.
Select a location which is out of reach for chil-
3.
4.
5.
6.
7.
laundry.
1.
5.
Safety precaution
can be dispersed easily and won't affect other
people.
2.
dren and far away from animals or plants. If it
is unavoidable, please add the fence for safety
purpose.
6.
1.
It’s not allowed to be installed on the unstable
or motive base structure
(such as truck) or in
the corrosive environment (such as chemical
factory).
5.
2.
3.
The location should be able to withstand t he
There should be no obstruction near air inlet
and air outlet.
According to the local safety regulations, use
Grounding requirement
uirement of installation dimension diagram.
Do not put through the power before finishing
4.Select a location which is out of reach for children.
installation.
7.If the supply cord is damaged, it must be repla-
Must follow the electric safety regulations w-
hen installing the unit.
4.Make sure that the installation follows the req-
air emitted by the outdoor unit will not affect
neighborhood.
Outdoor unit
1.Select a location where the noise and outflow
2.The location should be well ventilated and dry,
in which the outdoor unit won't be exposed dir-
ectly to sunlight or strong wind.
The location should be able to withstand the
weight of outdoor unit.
qualified power supply circuit and air switch.
The yellow-green wire in air conditioner is
Please try your best to keep way from fluores-
cent lamp.
8.
Don't install the indoor unit right above the ele-
ctric appliance.
7.
An all-pole disconnection switch having a co-
ntact separation of at least 3mm in all poles
should be connected in fixed wiring.
grounding wire, which can 't be used for other
purposes.
The grounding resistance should comply with
The place near coast area.
The place with oil or fumes in the air.
The place with sulfureted gas.
Other places with special circumstances.
The appliance shall not be installed in the
flammable or explosive gas, or volatile objects
spread in the air.
1.The place with strong hea t sources, vapors,
The place with high-frequency devices (such
4.
8.The temperature of refrigerant circuit will be hi-
with national wiring regulations.
as welding machine, medical equipment).
from the copper tube.
9.The appliance shall be installed in accordance
appliance. It must be properly grounded with
specialized grounding device by a professional.
Please make sure it is always grounded effecti-
vely, otherwise it may cause electric shock.
8
1.The air conditioner is the first class electric
3.
national electric safety regulations.
The appliance must be positioned so tha t the
p
l
u
g is accessible.
weight of indoor unit and won't increase noise
and vibration.
6.
ced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a
hazard .
The appliance must be installed 2.5m above
floor.
Air-conditioner
Air switch capacity
09
K
、
13
K
10
A
gh, please keep the interconnection cable away
Make sure the power supply matches with the
requirement of air conditioner. Unstable power
supply or incorrect wiring or malfunction. Pl-
ease install proper power supply cables before
using the air conditioner.
Properly connect the live wire, neutral wire and
grounding wire of power socket.
5.Be sure to cut off the power supply before pr-
oceeding any work related to electricity and safety.
the circuit)
pleasedo no
t
use the
fuse only for protecting
from overload and short circuit. (Caution:
heating
buckle function, it can protec t the
should be included magnet
buckle and
please note the following table
. Air switch
Including an air switch with suitable capacity,