9
Owner’s Manual
6HK13BEH0
Maintenance
FILTER CLEANING (See Figures 10 and 11)
There are two filters in the unit. The evaporator filter is located at the front of the unit. The condenser filter is
located at the back of the unit.1. Transport and store the unit in an upright position only. Leave unit in an upright
position for at least 3 hours before first use.
1. Pull the filter frame forward to remove the front filter.
2. Slide filter up and use a vacuum cleaner to remove the dust from the filter.
3. If the filter is heavily covered with dust and dirt, warm water and mild soap or neutral detergent may be used
to wash the filter. Do not use any other chemicals to clean filter, as they will likely damage the filter.
4. Dry the filter in a shaded area before replacing it. Do not operate the unit without the filter installed and the
filter guard in the closed position.
5. Replace the clean filter and close the filter guard.
6. To clean the condenser filter, lift up on the rear filter from the middle bar slightly and then angle the filter
outwards from the bottom and remove.
7. Use the same cleaning procedure as above (3 – 5).
8. To replace the condenser filter, place the top of the filter in the guide and slide the filter up until the bottom of
the filter clears the frame. Then push the bottom of filter into the guide and let filter gently fall inside the guide.
NOTE: For effective cooling clean the filter at least every 2 weeks.
Do not operate without the filter fitted.
Do not operate the unit with a damaged cord or plug, after the unit malfunctions, or if
the unit has been dropped or damaged.
– For your convenience, record the complete model number and product name (located on the Product
Identification Plate), the purchase date, purchase location, serial number, and warranty period in the table
below.
– Also, attach your purchase receipt as proof of purchase to this instruction manual for future reference.
– To ensure your product is covered by warranty, the complete faulty product along with your original purchase
receipt must be provided at the place of purchase.
9
6HK13BEHO
Owner’s Manual
Maintenance
FILTER CLEANING
(See Figures 10 and 11)
There are two fi lters in the unit. The evaporator fi lter is located at the front of the unit. The
condenser fi lter is located at the back of the unit.
1. Pull the fi lter frame forward to remove the front fi lter.
2. Slide fi lter up and use a vacuum cleaner to remove the dust from the fi lter.
3. If the fi lter is heavily covered with dust and dirt, warm water and mild soap or neutral deter-
gent may be used to wash the fi lter. Do not use any other chemicals to clean fi lter, as they will
likely damage the fi lter.
4. Dry the fi lter in a shaded area before replacing it. Do not operate the unit without the fi lter
installed and the fi lter guard in the closed posi on.
5. Replace the clean fi lter and close the fi lter guard.
6. To clean the condenser fi lter, up on the rear fi lter from the middle bar slightly and then
angle the fi lter outwards from the bo om and remove.
7.Use the same cleaning procedure as above (3 – 5).
8. To replace the condenser fi lter, place the top of the fi lter in the guide and slide the fi lter up
un l
om of the fi lter clears the frame. Then push the bo om of fi lter into the guide
and let fi lter gently fall inside the guide.
NOTE: For eff e ve cooling clean the fi lter at least every 2 weeks.
– For your convenience, record the complete model number and product name (located on the
Product Iden fi c on Plate), the purchase date, purchase loca on, serial number, and war-
ranty period in the table below.
– Also, a ach your purchase receipt as proof of purchase to this instruc on manual for future
reference.
– To ensure your product is covered by warranty, the complete faulty product along with your
original purchase receipt must be provided at the place of purchase.
Do not operate without the fi lter fi ed.
Do not operate the unit with a damaged cord or plug, a er the unit malfunc-
ons, or if the unit has been dropped or damaged.
– Pull the filter frame forward
to remove the front filter
– Slide filter up and use
a vacuum cleaner to remove
the dust from the filter.
– Remove dust from the filter
using a vacuum cleaner
achment.
– If required wash the filter in
lukewarm water with a mild
detergent. Leave to dry in
a shaded area before
reinstalling.
Figure 10 – Removing Filters
Figure 11 – Removal of Dust
