3
Owner’s Manual
6HK13BEH0
General Safety Information
Please read this manual carefully for instructions on correct installation and usage. Please read all safeguards.
1. Transport and store the unit in an upright position only. Leave unit in an upright position for at least 3 hours
before first use.
2. Always place the unit on an even, level surface.
3. Ensure the unit is connected to a grounded power supply of the correct rating / capacity.
4. The unit will cool when the room temperature is between 64°F (18°C) ~ 113°F (45°C) and heat when the room
temperature is between 56°F (12°C) ~ 80°F (27°C), depending on the thermostat setting.
5. DO NOT use this unit for functions other than those described in this instruction manual.
6. DO NOT tilt the unit.
7. DO NOT cover or obstruct the unit’s inlet and outlet grilles.
8. DO NOT use the unit in areas where it will be exposed to rain or water.
9. NEVER unplug the unit while it is operating.
DO NOT use the unit in wet environments, such as a laundry room, to avoid the risk of
electrical shock.
10. DO NOT place any foreign objects on the unit.
11. DO NOT operate the unit with wet or damp hands.
12. DO NOT allow chemical substances to come into contact with the unit.
13. DO NOT operate the unit in the presence of flammable substances or vapors such as alcohols, pesticides,
gasoline, etc.
DO NOT operate the unit in explosive or flammable environments.
14. DO NOT use the plug to start and to stop the unit. Always use the control panel to start and to stop the unit.
15. Always turn off the unit when it is not in use and unplug the power plug from the electrical outlet.
16. Always turn the unit off and unplug the main power plug from the electrical outlet before cleaning, moving or
performing maintenance.
17. AVOID the use of adapter plugs or extension cords. If it is necessary to use an extension cord or an adapter
plug to operate the unit, ensure that they are correctly rated for the application. Consult a local qualified
electrician and all local electrical codes to ensure proper setup. Any extension cord used with this device
must be rated for a minimum of 120V. (20A)
18. DO NOT unplug the unit by pulling on the electrical cord. Keep electrical cord away from heat sources and
always completely unroll the cord to avoid overheating. If the power cord becomes damaged, a qualified
service agent, qualified electrician, or similarly qualified person must replace it, in order to avoid a hazard
or shock.
