5
Owner’s Manual
6HK13BEH0
Assembly (6HK13BEH0)
5
6HK13BEHO
Owner’s Manual
Assembly (6HK13BEHO)
Front and Right Side View
Display / Control board
Top fan exhaust flange
Evaporator / filter
Guide bar for condensate water tank
Condensate water tank (Water level is
sensed, and the unit opera on is stopped
when tank is full. An alarm will be
displayed. Empty the tank and replace to
resume opera on)
1. Take out the cord holder from
the accessory box.
2. Place the cord holder on the
back side of the unit
3. Use screws (enclosed inside
of accessory box with cord holder)
to install the cord holder on the
e 4.
POWER CORD HOLDER
DISCHARGE DUCTS/SUPPLY AIR DUCT
Figure 3
Figure 2
Figure 4
Figure 5
Power cord holder
Caster
Electrical access panel
Condenser / filter
1. Remove the top fan exhaust
flange from carton.
2. Place the top fan exhaust flange
on the top of the unit.
3. Use screws (enclosed inside
of box with the top fan exhaust
flange) to install the top fan
exhaust flange on the unit
as shown in Figure 6.
TOP FAN EXHAUST FLANGE
Figure 6
Figure 7
Figure 8
A
B C
Condenser plenum can be purchased separately. Condenser plenum
fits over the condenser to duct condenser air to the unit to improve
cooling efficiency.
1. Remove the Filter("A")
2. Check the Filter("C") is inserted properly in Condenser plenum("B")
3. Install "B" which contains "C" by using driver with enclosed
bolts(6EA) as Figure 8.
CONDENSER PLENUM
Component parts
1. Remove cool air outlet hose(s)
from carton.
2. Place the cool air outlet hose(s)
on the front top of the unit
3. Use screws (enclosed inside of box
with cool air outlet hose(s) to
install the cool air outlet hose(s) on
the unit as shown in Figure 5.
EVAPORATOR PLENUM
An evaporator plenum can be purchased
separately. Plenum fits over the evaporator
to duct evaporator air to the unit to
improve cooling efficiency.
1. Remove the evaporator cover from the
unit.
2. Remove the filter from the evaporator
cover and put it into the plenum.
3. Install the plenum in front of the
evaporator.
