1
Handling and Safety Precautions
These precautions should be strictly observed in order to ensure safe, long-term
use of the product.
The following precautions should be observed particularly strictly:
1. This model is manufactured to feel like a living human body to the touch. Forceful or careless
handling may damage the model.
2. Any suction catheters, tracheostomy cannula, and feeding tubes used for training should be used
only with the model. Never use these items with a living human body.
3. Never put the simulated sputum provided as an accessory into human body (eyes or mouth). (The
simulated sputum is manufactured from a material used for cosmetics, and is manufactured using
materials that meet The Japanese Standards of Cosmetic Ingredients, as well as Supplement to the
Japanese Cosmetic Ingredients Codex.)
4. Liquid leakage may occur with improper use, and dirty the surroundings. Please read the
instruction manual carefully before use. It is recommended that the model be used in a place that
will not be damaged if leakage occurs, or on top of an absorptive sheet.
5. During practice and clean-up, please make sure that the head of the model is not lower than the body
when the tube feeding tank contains water or other liquids. Otherwise, leakage will occur.
6. This product is intended for use in standard operating environments. Do not use it in heavy industrial
settings.
7. This model uses urethane foam for some of its parts, and may be susceptible to damage from pests
that are attracted to urethane foam (such as insects in the ant family).
When storing this model, ensure that thorough measures are taken to prevent pest damage before
storing. The company will not be involved with or held liable for pest damage that occurs during
storage.
Maintenance of the model after use
1. Do not place objects on the model main body, as this may cause deformation.
2. To clean the model, use a neutral solvent diluted with water, or use water, and wipe the model
with a piece of gauze moistened with the solvent or water.
NOTE: Do not use thinner, benzene or similar solvents.
3. Store the model in a location where it will not be exposed to direct sunlight or ultraviolet rays.
4. Any marks made using water-based and oil-based pens, pencils, chalk, paint, etc. will penetrate into the
model and cannot be erased. Please be sure never to use these items.
1. The contents of this instruction manual are subject to change without notice.
2. This instruction manual may not be reproduced in part or in its entirety without permission.
3. Please contact the manufacturer in the event that any errors or omissions are found in the contents of
this instruction manual.
4. This product should be used only as described in this instruction manual. In particular, the product
should not be used in any way that contravenes the precautions noted in the instruction manual.
Summary of Contents for LM-097B
Page 2: ...10000...
