background image

11

3-9. Practice.

1) Put the model in the position in which practice will be done.
Note:  Please use this model in positions from 5° to <90°. If practice is carried out with the head of
  

the model placed lower than the body, or in an anteflexion or a lateral position, leakage will occur.

2) Put the end of the drainage tube into the drainage receptacle or sink, and open the cocks on the
drainage tubes of the tube feeding tank and gastrostomy tank. The cocks can be opened by pushing 
the lip in the direction of the arrow below.

4. Caring for the Model

4-1. Caring for the tube feeding components

1) After confirming that no nutrient solutions or other liquids are draining from the drainage tube, 
slowly return the model to a horizontal position and close the cock on each tube.

- 10 -

3-9. Practice.

1) Put the model in the position in which practice will be done.

Note: It is recommended that this model be used in positions from 0° to <90°. Leakage may occur

with body positions of ≥90° or in a lateral position.

2) Put the end of the drainage tube into the drainage receptacle or sink, and open the cocks on the

drainage tubes of the tube feeding tank and gastrostomy tank. The cocks can be opened by pushing the
lip in the direction of the arrow below.

4. Caring for the Model

4-1. Caring for the tube feeding components

1) After confirming that no nutrient solutions or other liquids are draining from the drainage tube, slowly

return the model to a horizontal position and close the cock on each tube.

- 10 -

3-9. Practice.

1) Put the model in the position in which practice will be done.

Note: It is recommended that this model be used in positions from 0° to <90°. Leakage may occur

with body positions of ≥90° or in a lateral position.

2) Put the end of the drainage tube into the drainage receptacle or sink, and open the cocks on the

drainage tubes of the tube feeding tank and gastrostomy tank. The cocks can be opened by pushing the
lip in the direction of the arrow below.

4. Caring for the Model

4-1. Caring for the tube feeding components

1) After confirming that no nutrient solutions or other liquids are draining from the drainage tube, slowly

return the model to a horizontal position and close the cock on each tube.

Summary of Contents for LM-097B

















Reviews: