TP-5660 11/98
Safety Precautions and Instructions III
Installing
accessories
to
transformer assembly. Hazardous
voltage can cause severe injury or
death.
To prevent the possibility of
electrical shock, disconnect harness
plug before installing any accessories
involving connection to transformer
assembly primary terminals 76, 77, 78,
and 79. Terminals are at line voltage!
(Models with E33+, S340, S340+, 340,
R340, or R33 controls only.)
Installing
accessories
to
transformer assembly. Hazardous
voltage can cause severe injury or
death.
To prevent the possibility of
electrical shock, disconnect harness
plug before installing any accessories
which will be connected to transformer
assembly
primary
terminals
on
microprocessor
logic
models.
Terminals are at line voltage!
Making
line
or
auxiliary
connections.
Hazardous voltage
can cause severe injury or death.
To
prevent the possibility of electrical
shock, deenergize the normal power
source before making any line or
auxiliary connections.
Short
circuits.
Hazardous
voltage/current can cause severe
injury or death.
Short circuits can
cause bodily injury and/or equipment
damage
.
Do not contact electrical
connections with tools or jewelry while
making
adjustments
or
repairs.
Remove wristwatch, rings, and jewelry
before servicing equipment.
Servicing
the
transfer
switch.
Hazardous
voltage
can
cause
severe injury or death.
Deenergize all
power sources before servicing. Open
main circuit breakers of all power
sources to the transfer switch and
disable all generator sets as follows:
1) Move all generator set master
controller switches to the OFF position.
2) Disconnect power to all battery
chargers.
3) Disconnect all battery
cables, negative (--) leads first.
Reconnect negative (--) leads last when
reconnecting battery cables after
servicing. Follow these precautions to
prevent starting of generator sets by an
automatic transfer switch, remote
start/stop switch, or engine start
command from a remote computer.
Servicing transfer switch controls
and
accessories
within
the
enclosure. Hazardous voltage can
cause severe injury or death.
Disconnect transfer switch controls at
the inline connector to deenergize the
circuit boards and logic circuitry but
allow the transfer switch to continue to
supply power to the load. Disconnect
all power sources to any accessories
mounted within the enclosure but which
are not wired through the controls and
deenergized
by
inline
connector
separation.
Test circuits with a
voltmeter to verify that they are
unpowered before servicing.
Heavy Equipment
Unbalanced weight.
Improper lift can cause severe
injury or death and/or equipment
damage.
Use adequate lifting capacity.
Never leave transfer switch standing
upright unless it is securely bolted in
place or stabilized.
WARNING
Summary of Contents for ZCS series
