1.25>132
1-5/8”
16”
32”
14”
2-1/2”
60”
2-7/8”
3”
18-1/4”
3/4”
PUMP
PUMP/CONTROL ACCESS
1-1/2” I.P.S. THR’D.
1-1/2” O.D.
1/4”
1-1/8”
FIELD WIRING
COMPARTMENT
4
111889-
CA
(1093)
Kohler Co., Kohler WI
1. ROUGHING-IN: K-852-V-AB, K-852-JA-AA
A. ORDERING INFORMATION
Factory installed components include pump with integral
timer, and air switch transmitter.
Accessories/hardware:
Jet trim kit
K-9694
required
Drain
K-7169-AF recom-
mended
Adjustable feet
K-1172
optional
Vinyl tiling-in bead*
K-1179
optional
* Use K-1179 vinyl bead when wall material contacts
any top surface of bath.
B. REQUIRED ELECTRICAL SERVICE
Dedicated circuits required, protected with Class A
Ground-Fault Circuit-Interrupter (60 Hz) or ELCB (50
Hz):
Pump/control
120 V., 15 A, 60 Hz
or 230 V., 15 A, 50 Hz
C. PRODUCT INFORMATION
Fixture:
basin area
top area
weight
Bathing well
40-1/2” x
20”
52-3/4” x
24”
280 lbs.
water depth
capacity
To overflow
13”
60 gal.
Pump, 1-speed:
hp
V
Hz
A
60 Hz
3/4
120
60
10
50 Hz
3/4
230
50
5.5
D. INSTALLATION NOTES
Refer to installation instructions included with fixture before
beginning installation.
The motor/pump extends 1-1/8” beyond bath rim.
Provisions should be made during installation.
ROUGHING-IN NOTES
Fixture dimensions are nominal and conform to toler-
ances in ANSI/ASME Standard A112.19.1
No change in measurements if connected with drain
illustrated.
Cut-out
58-1/2” x 30-1/2”
Minimum access:
Pump/control box 20” W x 15” H panel required
