Taladre los orificios para las jambas murales (cont.)
A lo largo del la ranura central taladre un orificio de 3/16
″
a 3
″
(7,6 cm) de cada
extremo de la jamba mural.
Taladre el tercer orificio en el punto central de la jamba mural.
Repita este procedimiento con la segunda jamba mural.
2.
Mark the Wall Jambs
IMPORTANT!
The wall jamb must sit flat on the threshold. If your threshold has a
curve in the corners at the side wall, it may be necessary to shape the bottom end of
the wall jamb with a file.
NOTE:
If tapered wall jambs are used, the tapered area should be located on the
threshold, with the taper against the wall. If straight wall jambs are used, the longer
leg should be toward the outside of the shower.
Locate one of the wall jambs on a shower sidewall.
Center the wall jamb on the threshold.
Use a level to plumb the wall jamb vertically.
Temporarily secure the wall jamb to the wall with masking tape.
Wall Jamb
Montant du mur
Jamba mural
Long Leg
Jambe longue
Pata larga
Tapered Wall Jamb
Montant du mur conique
Jamba mural angular
Measure here.
Mesurer ici.
Mida aquí.
Threshold
Seuil
Umbral
Wall Jamb
Montant du mur
Jamba mural
Mark holes.
Marquer les orifices.
Marque los orificios.
Level
Niveau à bulle
Nivel
1113654-2-E
8
Sterling
Summary of Contents for Sterling 660B/SP-46S
Page 35: ...Sterling 1113654 2 E ...
Page 36: ...1113654 2 E ...
