background image

Cautions and warnings   . . . . . . . . . . 2
Precautions for use   . . . . . . . . . . . . . 6
Ef cient use   . . . . . . . . . . . . . . . . . . . 7
Overview of features   . . . . . . . . . . . . 8
Initial settings list  . . . . . . . . . . . . . . . 8
Names of parts  . . . . . . . . . . . . . . . . . 9
Before use  . . . . . . . . . . . . . . . . . . . . 10

How to use the Washlet  . . . . . . . . . 12
Convenient functions  . . . . . . . . . . . 14

 

 Adjusting the temperature  . . . . . . 14

Energy saver functions  . . . . . . . . . 16

 

 Smart Energy Saver . . . . . . . . . . . 17

 

 Timer-based Energy Saver . . . . . . 17

Maintenance . . . . . . . . . . . . . . . . . . . 20

 

 Before cleaning  . . . . . . . . . . . . . . 20

 

 Daily cleaning . . . . . . . . . . . . . . . . 21

• Cleaning the main Washlet unit, 

seat and lid . . . . . . . . . . . . . . . . . . . . . . . . . . .21

 

 Thorough cleaning  . . . . . . . . . . . . 22

• Cleaning the clearance between the seat 

and lid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

• Cleaning the clearance between the main 

Washlet unit and the toilet  . . . . . . . . . . . . . . .23

 

 Periodic cleaning  . . . . . . . . . . . . . 24

• Cleaning the mains plug  . . . . . . . . . . . . . . . .24
• Cleaning the wand . . . . . . . . . . . . . . . . . . . . .24
• Cleaning the drain valve with  lter . . . . . . . . .25

Preventing damage from freezing and 
measures for long-term disuse . . . . . . 27
Troubleshooting  . . . . . . . . . . . . . . . 32
Speci cations  . . . . . . . . . . . . . . . . . 37

Warranty . . . . . . . . . . . . . . . . . . . . . . 38

Important User Guidance Information  . .  39

Introduction

Operation

Cleaning

Troubleshooting

Washlet EK

TCF6402G/GE

 

„

Thank you very much for purchasing this Washlet. Please read 
this instruction manual carefully to ensure proper use.

 

„

The speci cations, model number, etc. are subject to change 
without prior notice.

 

„

“Washlet” is a registered trademark of TOTO.

Instruction Manual

K837(Euro)InstructionManual̲EN.indb   1

2011/03/15   10:53:13

Summary of Contents for Washlet EK TCF6402G









































Reviews: