8.5
Recommended fuel quality
Using fuel which does not comply with the following specifications exposes the equipment to irreversible damage not covered under
warranty:
-
Cleanliness and quality: ensure that the petrol used does not contain water and that it is fresh and clean (not out of date or
contaminated). For the
-
Octane rating: minimum octane rating of 87 (R+M)/2 or minimum octane rating of 90 (RON = Research Octane Number)
-
Blends: the use of unleaded petrol containing up to 10% ethyl alcohol is authorised (France: SP95-E10). It is not permitted
to use unleaded petrol containing less than 90% petrol, e.g. E15, E20 or E85. Blends of methyl tert-butyl ether (MTBE) and
unleaded petrol are approved (up to a maximum of 15% MTBE by volume).
However, it is strongly recommended that the same type of fuel is used throughout the complete service life of the unit. If the unit is
used infrequently (less than once a month), use new fuel with each use or add a stabilizing additive to the fuel tank.
8.6
EC Declaration of conformity
We, SDMO Industries - 270 rue de Kerervern, 29490 GUIPAVAS/CS 40047, 29801 BREST CEDEX 9 – France, hereby declare
under our sole responsibility that the following generating sets:
Equipment
description:
Make:
Trade name:
Type:
Serial numbers:
Generating set
KOHLER-SDMO
PERFORM 3000 XL
TB UK C5
3499231003572
09-2019-00000000-000
> 52-2026-99999999-999
1. Comply with the safety requirements set out in the Low Voltage Directive -
2014/35/EU
of 26 February 2014 in application of the
harmonized standard EN ISO 8528-13: 2016
2. Comply with the provisions of the following Directives:
-
Machinery -
2006/42/EC
of 17th May 2006 in application of the harmonized standard EN 8528:-13: 2016
-
Electromagnetic compatibility -
2014/30/EU
of 26th February 2014 in application of the harmonized standards EN 60034-1:
2010 (COR 2010) / EN 61000-6-1: 2007 / EN 61000-6-2: 2005 (COR 2005) / EN 61000-6-3: 2007 (AMD1 2011,
AMD1/COR 12) / EN 55011: 2009 (AMD 1 2010)
-
Relating to the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2) -
2011/65/EU
of 8th June 2011 (from 23rd July 2019) in application of the harmonized standard EN 50581: 2013
-
Relating to noise emission in the environment by equipment for use outdoors-
2000/14/EC
of 8 May 2000, via the
compliance procedure set out in Annex VI:
Notified body:
Measured sound power level:
Guaranteed sound power level
(LwA):
Rated output:
CETIM, BP 67- F60304 –
SENLIS – FRANCE
94,86 dB(A)
95 dB(A)
2400W
Name and address of the person authorized to create and hold the technical file:
L. ANDRIEUX, 270 rue de Kerervern, 29490 GUIPAVAS / CS 40047, 29801 BREST CEDEX 9 – France.
GUIPAVAS, 11/2019
L. ANDRIEUX
President, SDMO Industries
9 Conditions of warranty
COMMERCIAL WARRANTY
Your unit is covered by a commercial warranty granted by
SDMO Industries
. This warranty must be applied by the distributor from
which you purchased your unit, in accordance with the following provisions:
TERM:
The warranty for your unit is valid for a period or 36 months or 2000 operating hours, from the date of purchase. It applies to
whichever of these thresholds is reached first. If the unit does not have a working hours counter, the number of operating hours will
be deemed to be eight (8) hours per day.
TERMS FOR APPLICATION OF THE WARRANTY:
The warranty starts on the date the unit was purchased by the first user. This warranty is transferred with the unit if the first user
chooses to transfer it, either free or for a charge; it is valid for the remaining duration of the initial warranty, which cannot be
extended.
The warranty only applies upon presentation of a legible purchase invoice, which states the date of purchase, the unit type, the
serial number, and the name, address and commercial stamp of the distributor.
SDMO Industries
reserves the right to refuse to
honour the warranty in the absence of documentary evidence of the date and place of purchase of the unit. This warranty entitles
the holder to the repair or replacement of the unit or its components, if deemed to be defective by
SDMO Industries
after expert
analysis in its workshops;
SDMO Industries
reserves the right to modify the equipment on the unit to meet its obligations. The unit
or components replaced under warranty become the property of
SDMO Industries
.
LIMITATION OF THE WARRANTY:
The warranty applies to units installed, used or maintained in accordance with the documentation provided by
SDMO Industries
,
and in the event of any operating defect with the unit, caused by a fault with the design, manufacture or material.
SDMO Industries
does not guarantee the performance capabilities of the unit, or its operation or reliability if it is used for specific purposes. Under no
circumstances can
SDMO Industries
be held responsible for any consequential loss, whether or not arising out of material damage,
which includes but is not limited to the following: Any operating losses, costs or expenses resulting from unavailability of the unit,
etc. The warranty is limited to the cost related to the repair or replacement of the unit or one of its components, excluding
consumables. The warranty therefore covers the costs of parts and labour, excluding travel costs. The cost of transporting the unit
or one of its components to the workshops of SDMO INDUSTRIES or one of its approved agents shall be borne by the Customer;
the "return" transport costs shall be borne by
SDMO Industries
. However, in the event that the warranty does not apply, all transport
costs shall be borne by the Customer.
21/22
