8
If the USB storage stick does not start automatically, find the USB drive location
using Windows Explorer and run the following file:
For example if the USB stick is using drive
“E:\”
find the following path:
E:\RADA_OUTLOOK.exe
3.
Connect the USB Cable to the Sensor Box.
SOFTWARE INSTALLATION
Installation of RS485 - USB Driver
on Windows
1.
If you are running Windows XP or Windows XP SP 1, temporarily disconnect
your PC from the Internet. This can be done by either removing the network
cable from your PC or by disabling your network card by going to the
“Control
Panel\Network and Dial-Up Connections”
, right-clicking on the appropriate
connection and selecting
“Disable”
from the menu. The connection can be
re-enabled after the installation is complete.
If you are running SP2 or above, the internet connection does not need to be
disconnected.
2.
Follow the on screen instructions to install the USB Cable Driver and the Rada
Outlook Configuration Tool.
Summary of Contents for rada outlook
Page 31: ...31 NOTES...
