NOTE:
Do not caulk the access cover to the floor.
If this installation uses wall mounted electrical or water
supplies, cut a recess in the access cover using a utility knife
at the spot marked on the access cover.
Place the access cover over the opening in the back of the
toilet.
Caulk around the base of toilet. Do not caulk the area where
the access cover meets the floor.
Fig.#14
14
Access
Opening
Caulk Base Of Toilet.
Toilet Back
Do Not Caulk Base Of Access Cover.
Cut With Utility Knife.
Access Cover
COMPLETE THE INSTALLATION
-9-
1061926-T01-A
