9
114189-2-
CA
(9608)
Kohler Co., Kohler WI
B. TO ADJUST LEVEL
Shim using minimum size 6” x 6” shims, and a maximum
spacing of 24”. Set the whirlpool into position, and align
the drain tailpiece with the trap. Make sure the whirlpool
is level.
C. CONNECT DRAIN
When the whirlpool is securely positioned, connect the
drain to the trap as shown.
Drain
Plumbing
Stud
Pocket
D. SECURE WHIRLPOOL
Secure the nailing flange to the stud pocket header with
the screws supplied with the unit.
After the unit is secured to the header to prevent
spreading or squeezing of the walls, remove the
shipping spreader bar. Test the operation of the door to
ensure there is no binding.
Supplied
Screws
Spacer
Bar
E. PUMP BANDING STRAP CUT
NOTICE: This step is necessary to make your
Kohler whirlpool operate more quietly.
1.
Use tin snips to cut the two banding straps. These
banding straps secure the pump to the support pan
during shipping.
Suction Line
Pump
Subfloor
Banding Straps
Pump Base
Support Pan
