18
No water or very low
flow rate.
Clear the blockage or replace
the hose or handset.
The hose or handset is
blocked.
FAULT DIAGNOSIS
Shower is too hot.
Turning the
temperature knob
does not affect the
water temperature.
The water continues
to flow when the
double pole switch is
turned off.
The incoming water is
warmer in the summer, so
the shower power setting is
too high.
The handset sprayplate is
blocked.
The handset sprayplate is
blocked.
Broken diaphragm.
Turn the power knob to
Medium
and adjust the
temperature knob until the
desired temperature is
reached.
Regularly clean the handset
sprayplate. Refer to the
Maintenance
section of the
handset manual.
Remove and clean the handset
sprayplate. Refer to the
Maintenance
section of the
handset manual. If the fault
persists, contact the shower
installer.
Contact your installer to
replace the flow valve
assembly.
Malfunction
Cause
Remedy
Shower is too hot
during the summer.
The troubleshooting information tabled below gives you details on probable causes
and remedies should difficulties be encountered whilst the shower is in operation.
Warning!
There are no user serviceable components beneath the cover of the
appliance.
ONLY A COMPETENT TRADESPERSON SHOULD REMOVE THE FRONT COVER!
The handset sprayplate is
blocked.
Clean the handset sprayplate.
Refer to the
Maintenance
section of the handset manual.
The incoming water supply
stop valves, or the
appliance isolating valve, is
closed.
Open the stop/isolating valve
completely.
(Continued. . . .)
