3
1232447-W2-A
WARNING - This product can deliver scalding temperatures if not operated, installed
or maintained in accordance with the instructions, warnings and cautions contained
in this guide.
The function of a thermostatic mixing valve is to deliver water consistently at a safe temperature.
In keeping with every other mechanism, it cannot be considered as functionally infallible and
as such, cannot totally replace a supervisor’s vigilance where that is necessary. Provided it is
installed, commissioned, operated and maintained within manufacturers recommendations,
the risk of failure, if not eliminated, is reduced to the minimum achievable.
Mira thermostatic mixers are precision engineered and should give continued safe and
controlled performance, provided:
1.
They are installed, commissioned, operated and maintained in accordance with the
manufacturer’s recommendations.
2.
Periodic attention is given, when necessary, to maintain the product in good functional
order.
Caution!
1.
Read all of these instructions and retain this guide for later use.
2.
Installation must be carried out in accordance with these instructions, and must be
conducted by designated, qualified and competent personnel.
3.
Pass on this guide in the event of change of ownership of the installation site.
4.
Follow all warnings, cautions and instructions contained in this guide.
5.
Make sure that you fully understand how to operate this shower before use, read all
operating instructions and retain this guide for future reference.
6.
This product is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning the use of the product by a person
responsible for their safety.
7.
Children should be supervised to ensure that they do not play with the product.
8.
DO NOT
perform any unspecified modifications to the shower or its accessories. When
servicing only use genuine Kohler Mira replacement parts.
9.
DO NOT
fit any form of outlet flow control. Only Mira recommended outlet fittings should
be used.
10. DO NOT
operate the temperature control rapidly, allow 10 – 15 seconds for the
temperature to stabilise before use.
11.
Care is required when adjusting flow or temperature, make sure that the temperature
has stabilised.
12.
Care is required if the product is turned off and back on during showering as this may
result in unstable temperature. Ensure temperature has stabilised before re-using
product.
13.
Sunburn or skin conditions can increase your sensitivity to hot water. Make sure that
you set the shower to a cooler temperature.
14.
The water supplies to this product must be isolated if the product is not to be used for
a long period of time. If the product or pipework is at risk of freezing during this period
they should also be drained of water.
15.
When this product has reached the end of its serviceable life, it should be disposed of
in a safe manner, in accordance with current local authority recycling, or waste disposal
policy.
